1. Have the tool in hand facing your carpet cleaner with the larger end of the tool on the right and the smaller end on the left.
2. Attach the larger end on the right side of the floor nozzle first, aligning the tab into the floor nozzle notch.
3. Next, attach the tab on the left side of the tool into the floor nozzle notch.
4. Be sure you hear the Bare Floor Tool SNAP into place. When using the Bare Floor Tool, press the handle trigger for spray while traveling forward. Release the trigger for suction while pulling the Upright Carpet Cleaner back.
Still need help? Please call us at 1-800-263-2535, Monday - Friday 8 a.m. to 10 p.m., Saturday 9 a.m. to 8 p.m., or Sunday 10 a.m. to 7 p.m. ET. A representative will be ready and waiting to help you out!