FAQ Search Select a Category Cleaning Formulas Cleaning Tips Corporate Deep Cleaners FAQ Hard Floor Cleaners Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My CleanView® Vacuum's brushes aren't turning. How can I fix this? Answer: Just to be safe, unplug your machine and remove the access plate and check the brush and belt for damage. Clean off any debris on the brush. If brush will not turn by hand, or belt is broken, you’ll need to replace the damaged part(s). To order the belt, click on this link: http://www.bissell.com/parts/?sc=part&partid=4680&cid=ccsocial To order the brush, click on this link: http://www.bissell.com/parts/?sc=part&partid=26885 If the brush is still not turning, please take the machine to a BISSELL Authorized Service Center to have a technician check it. You can locate one by clicking here: http://www.bissell.com/service-centers/. Related Questions Why isn't there any suction with my Pet Grooming Tool? My Garage Pro® blower mode is not functioning. What should I do? The handle on my Momentum or PowerTrak Cyclonic Vacuum is difficult to install. What can I do? My Momentum® or PowerTrak® Cyclonic Vacuum is hard to push. Any suggestions?