FAQ Search Select a Category Cleaning Formulas Cleaning Tips Corporate Deep Cleaners FAQ Hard Floor Cleaners Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go The TurboBrush® for my Deep Clean Premier® is not spinning. What do I check? Answer: The TurboBrush® Tool is air-driven, suction may be the reason for why it is not spinning correctly (if there is not a problem with the Brush). Make sure the machine is locked in the upright position. With the tank removed, check the red lint screen at the motor duct and clean if debris is built up. Check for suction at the end of the hose without the TurboBrush tool on, if there is good suction at the end of the hose, re-attach the TurboBrush tool and try for suction again. If there still isn’t any suction, the tool may need replacing. To order the TurboBrush tool, click on this link: http://www.bissell.com/parts/?sc=part&productid=26004&partid=4379 Related Questions Water is coming out the side vents. What should I do? My Little Green 1720,1725 is leaking from the bottom. What can I do to correct this? My 1720 Series Little Green® has no power. What can I do? My 1720 Series Little Green® is leaking. What should I check?