Shopping Cart
Exclusive Offer for Email Subscribers! Learn More
Get free shipping on any order over $40!Learn More
  • Pay with PayPal Fast & Easy Checkout
  • FREE Shippng FREE Shipping over $49
  • ribbon 30-Day Returns
  • COVID-19 Update
  • Pay with PayPal
  • FREE Shippng
Why shop at
  • ribbon

My Rewind is making excessive noise. What should I do?


1. First, check the Pre- and Post-Motor Filters for debris. Dirty filters can restrict airflow. There’s a circular disk inside the hole attached to the dirt container locking lever. Also, the circular filter inside the filter cup (below the dirt container) has two parts: an outer foam filter and the larger inner filter. All these pre-motor filters may be hand-washed in cold water with mild detergent. In the upper tank, there’s a plastic piece covered in louvers (thin slats) that can also be rinsed off. Reinstall the filters when they are completely dry. If you don’t regularly maintain the filters, the buildup could damage the motor. Please note: the HEPA Media filter is not washable.

2. A clogged hose may also cause the unit to sound strange. Here’s how to unclog the hoses:

a) To clear the main upholstery hose:

First, detach the hose from the vacuum. Push a broomstick into the hose to push any obstruction to the curved end of the hose where it can be removed.

Note: A coat hanger is not recommended to clear a clog as it may damage the hose.

b) To clear the lower hose:

The lower hose can be found next to the right hand wheel. Remove the screw from the left side of the lower hose on back of the vacuum and straighten this section of hose by pulling it down or lay the vacuum out flat (you’ll need to push the handle release pedal twice) and roll it on its side with the lower hose towards the top side. Remove the hard plastic hose wand base (held up by a single screw) to expose the lower hose. Look through the hose for obstructions. Push a broomstick through lower hose to unclog. The access plate (the black plastic plate over the brush roll) can also be removed to gain better access to the lower hose. Note: A coat hanger is not recommended to clear a clog as it may damage the hose.

3. If your vacuum is still too loud, please take it to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking or by calling 1-800-263-2535, available 24 hours a day. 

Show fewer features
Show more features
Show All Specs
Hide All Specs