FAQ Search Select a Category Cleaning Formulas Cleaning Tips Corporate Deep Cleaners FAQ Hard Floor Cleaners Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My PowerForce® Bagless vacuum is very loud. What can I check? Answer: Check the inner and outer circular filters and the post-motor filter for debris. The inner and outer circular filters are the lower half of the dirt container. These can be rinsed. The post-motor filter is covered by a plastic grate just below the dirt container. Check the upper tank’s primary separator. This is the grey plastic part of the upper tank (it’s covered in louvers). You can simply unscrew it and rinse it with water. Note: Failure to properly maintain the filters could result in damage to the motor. A clogged hose may also cause the unit to sound abnormal—see our “PowerForce Clearing Clogs” FAQ if necessary. If you still experience excessive noise at this point it might be best to take your vacuum to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/service-centers/ or by calling 1-800-263-2535, available 24 hours a day. Related Questions Why isn't there any suction with my Pet Grooming Tool? My Garage Pro® blower mode is not functioning. What should I do? The handle on my Momentum or PowerTrak Cyclonic Vacuum is difficult to install. What can I do? My Momentum® or PowerTrak® Cyclonic Vacuum is hard to push. Any suggestions?