FAQ Search Select a Category Cleaning Formulas Cleaning Tips Corporate Deep Cleaners FAQ Hard Floor Cleaners Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My AeroSwift™ Vacuum is blowing dust. What can I do? Answer: Check the lower hose by removing the screw from the left side of the lower hose on back of the machine and straighten this section of hose by pulling it down or lay the machine out flat (You’ll need to push the recline pedal twice to lay the machine flat) and roll the machine on its side with the lower hose towards the top side. Look through the hose for obstructions. Push a broomstick through the lower hose to unclog. (The access plate can also be removed to provide a better view of the lower hose). Make sure you have thoroughly vacuumed the area where machine is sitting as the brush will continue to rotate. Brush rotation will cause debris to move up through the hose. Related Questions My screw broke while assembling my PowerForce® Bagless Vacuum. What can I do? Why isn't there any suction with my Pet Grooming Tool? My Garage Pro® blower mode is not functioning. What should I do? My Momentum® or PowerTrak® Cyclonic Vacuum is hard to push. Any suggestions?