Push a button and enjoy hands free permanent pet stain removal with BISSELL SpotBot Pet. It is important to maintain your machine by cleaning it regularly.
Once cleaning is complete, before turning off SpotBot, rinse out the inside of the vacuum hose. If automatic cleaning was used, remove the hose from the machine by pressing the release button. If manual cleaning was used, suction up clean water to thoroughly rinse out the inside of the vacuum hose.
Then, lift the hose upwards to drain any remaining water into the dirty tank. Press the STOP button to turn the unit off. Unplug the power cord. Wrap power cord around the cord wrap.
If the tough stain tool was used, rinse it out and then store on the back of the machine. Empty and rinse the dirty water/collection tank after each use or when the dirty water tank reaches the indicated maximum fill line.
To remove the tank, lift up the dirty tank latch and pull the tank out. Dump out the dirty water and rinse out the tank. Dump out any remaining water/solution from the clean tank and rinse out before storing.
Re-place the tank in the unit.
After using automated features, wipe the window and brushing area with a soft cloth. Periodically, clean out the black valve inside the dirty water/collection tank. Wipe the gasket in the base of the machine that the black valve sits on.
Following these cleaning tips will result in optimal performance of your machine.