How to Assemble Your Pet Hair Eraser® Lift-Off® Video Assembly of your Pet Hair Eraser® Lift-Off® is easy. We’ll show you how! First, slide the handle into the vacuum base and attach the screw that is taped to the handle using a Philips head screwdriver Next, attach the hose by lining the tabs on the cuff with the notches on the back of the vacuum. Twist clockwise to lock the hose into place Now, push the handle end into the base of the vacuum on the opposite side To install the optional Febreze filter, press the tank release button and pull the container away from the vacuum You’ll then need to remove the post-motor filter by pulling up on the tab of the filter cover. Unlock the post-motor filter by twisting the tab counter-clockwise Finally, remove the post-motor filter and replace with the Febreze filter Then place the dusting brush and LED crevice tool on the unit Now wrap the power cord around the upper and lower cord wrap That’s it! Your Pet Hair Eraser® Lift-Off® is now ready to get to work!