FAQ Search

BISSELL ProHeat 2X CleanShot - no spray

My machine will not spray. What should I check?

ANSWER:  If your ProHeat 2X CleanShot machine is not spraying, please check to ensure there is liquid in the water tank and the formula bottle.

Note: This machine will spray with liquid in the Water tank only if the machine is set to the Water Rinse setting. On any other setting, you need to have liquid in the formula tank as well.

If no: add liquid to the Water tank and the Formula tank.
If yes: check each of the following....
- Check the bottom of the Water Tank and the Formula Tank to make sure each has a red auto-load gasket attached. Make sure the Water Tank and the Formula Tank are seated properly.
- Ensure the tank lid is properly attached to the bottom of the tank. To attach this properly, remove the Water Tank from the machine. Hook the front window onto the lip of the bottom container and then allow the window with lid to cover the complete tank. Secure the latch on the back of the bottom tank to the back of the tank lid. THE TANK LID CANNOT BE ATTACHED PROPERLY IF THE BOTTOM TANK IS ALREADY INSTALLED IN THE MACHINE.
-If everything is seated and attached properly, prime the machine by turning off the power, waiting one minute, and then turning the power back on and depressing the trigger on the handle.
If priming the unit does not fix the problem, remove the handle completely and re-attach. Once the handle is re-attached attempt to spray.

If your machine continues to not spray, please take your machine for inspection to a local BISSELL Authorized Service Centre. Go to the BISSELL Canada Homepage at: http://www.bissell.ca. Select Service Centre from the Customer Service drop down menu.

A BISSELL representative can also assist you by calling 1-800-263-2535, Monday - Friday 8 a.m. to 10 p.m., or Saturday 9 a.m. to 8 p.m., ET.